Non-Destructive Testing and Inspection Services:

 

The Engineers for Technical & Oil Services ( ETOS ) provides Non-Destructive Testing of pressure vessels, steam tanks, process piping, storage tanks, paper machine dryers, and more.  Whether you work at a paper mill, concrete plant, or Petro- Chemicals facility, the requirements generally mandate Non-Destructive Inspections every 3 to 5 years.  ETOS Company can provide you with the inspection services necessary to meet these requirements.

 

ETOS NDT’s number one goal is providing our customers with quality, accurate and dependable service on-site, and off. We offer on-site non-destructive inspection services such as Remote Visual Testing, Magnetic Particle Testing, Dye Penetrant Testing, Ultrasonic Testing, Vacuum-Box Testing, and others. All testing is carried out under the Codes and Regulations of ASNT, ASME and all other governing bodies for each specific test's requirements. We can also provide industry specific procedures based upon your specific requirements.

VEO Phased Array 16:64 PR

Retaining the best features of the established veo line, the new VEO+ is designed to meet the needs of today and tomorrow:

  • Standard Weld Inspection 

  • Fast Corrosion Mapping 

  • Fast Composite Inspection 

 

Scan & Views:

  • Supported Scans S-Scan & L-Scan

  • Real Time Views S, L, B, C-Scan, Top and End view

  • Colour Maps 8 Standards (Rainbow, Grayscale, Spectrum, Aeronautic or custom)

  • Multi Group Multiple Sector scans and TFOD

  • No. of Channels 2 TX/RX (2 multiplexed channels)

  • Test Mode Pulse-Echo, transmit/receive, TOFD

Condition Monitoring 

  • Easy data collection and powerful analysis tools in a single unit.

  • Four-channel data collection for faster route completion and advance diagnostics.

  • Embedded intelligence guides test set up and data analysis.

  • Ergonomically designed to improved usability in the field. 

Magnetic Particle Inspection 

The following MPI techniques are offered; Yoke type, prod type and coil type magnetizing equipment, dry power, wet magnetic particles & wet fluorescent magnetic particle technique mainly using for casting, forgings, welds, turbines & the components of rotating machinery to check surface / sub surface cracks, etc. 

Laser belt pulley alignment TKBA 40

The SKF TKBA 40 aligns V-belt pulleys in the grooves. V-guides and powerful magnets allow the TKBA 40 to be in the grooves of the pulley. With only two components, a laser-emitting unit and a receiver unit, the belt alignment tool is easy and fast to attach. The three - dimensional target area on the receiver unit allows the easy detection of misalignment as well as its nature; whether it is horizontal, vertical, parallel or a combination of all three. 

Jireh Skoot

The Skoot, our newest modular and motorized scanner is designed to carry multiple attachments, the Skoot can be used for many scanning and inspection applications. This remotely operated scanning platform is capable of circumferential scans from 63.5 mm (2.50”) to flat surfaces and longitudinal scans from 762 mm (30′′) minimum OD to flat. The Skoot uses rare-earth magnetic wheels allowing vertical payloads as heavy as 41 lbs and can be configured to connect to all types of brands and instruments.

Vacuum Box 750

Bubble leak testing of tank bottom plate welds and shell to bottom plate welds. 

Silverwing V750, the technician's favorite vacuum box designed for efficient bubble leak testing of tank bottom plate 

Radiographic Testing 

Radiographic inspection is offered to inspect welding at the manufacturing facilities of fabricators & foundries, as well as during construction of thermal power plant, refineries and petrochemical plants.

Laser shaft alignment TKSA 41

The TKSA 41 is an advanced laser alignment solution for achieving accurate shaft alignment. With two wireless measurement units, large sized detectors and powerful lasers, the instruments performs precise measurements in even the most challenging conditions. 

Floor Mapping 3Di

Advanced model combines the benefits of the basic and intermediate scanners into one fully featured system giving maximum flexibility. 

Silverwing Inspections Mapping Software (SIMS) provides a powerful and efficient means of post inspection analysis, the ability to create high-quality inspection reports and data archiving for inspection traceability. 

  • Multi views 

  • Image marker 

  • Top/bottom view

  • Automatic Tank Layout Drawing 

  • Tank Customization 

Ultrasonic Testing 

Ultrasonic thickness measurements is carried out for assessing corrosion in process plant, piping & equipment. ETOS instruments have latest through coat technology, making it unnecessary to remove paint from the surface which measurement is carried out. Data logger and variety of software are used to produce reports which form a useful database for tracking corrosion. 

Ultrasonic leak detector TKSU 10 

The SKF TKSU 10  is an ultrasonic leak detector that helps users to quickly find leakages in compressed air or vacuum systems. The instrument is very simple to use and features adjustable sensitivity and intuitive guidance for superior leak detection results. Any compressed air system can experience leaks, which amplify the load on compressors and increase costs. 

ETOS Co.

Oil and Gas Services Company

OUR SERVICES
  • Domestic Constructor

  • Technical assistance.

  • Contract Manpower.

  • EPCe contracts.

  • Gas turbine inspection & maintenance.

  • Drilling activities.

read more ......

VISIT US

10.54.152 Mohamed Mustafa Pazama St. 

Noflyeen - Tripoli

Libya

© 2006 - 2020 All rights reserved.  The Engineers for Technical and Oil Services Co. (ETOS)